[SOLD] 1973 dodge challenger project

[penski61]

73 challenger located in Mesa , Az
I have just about everything to put the car back together except for the following - upper and lower arms , spindles and brakes , rear leaf springs , front spring mounts for leaf springs and front windshield . I can put a 8-3/4 under it with with new shoes and springs for brakes but 3rd member would need to be swapped out its open diff with a 2.93 gear ratio from what I was told and does not have a yoke. with the 8-3/4 id like to get $4500 with stock k member
or I can sell it with the dana 60 and 4 link for $6000

plan was to do a modern hemi swap , transmission tunnel has been opened up .
i do have a 6.1 hemi and tremec 6060 6 speed i can sell with this along with a partial gerst eliminator coil over conversion kit
total price for everything would be 11k

 

[penski61]

will trade for 70-72 duster or demon , 67-69 fastback cuda can be a roller or running and driving but must have good paint or freshly painted . max price on the trade would be 12k

 

[65 CUDA]

Would you trade for a 1965 barracuda with a plethora of extra parts including extra doors, quarter panels, hoods, dash, motors, transmissions, seats, full center console, new headliner, tail lights. My barracuda is located in laveen


QUOTE="penski61, post: 1971898406, member: 50044"]will trade for 70-72 duster or demon , 67-69 fastback cuda can be a roller or running and driving but must have good paint or freshly painted . max price on the trade would be 12k[/QUOTE]

 

[65 CUDA]