[FOR SALE] 1973 steel crank 440

-
Status
Not open for further replies.

wannadrag

Well-Known Member
Joined
Oct 9, 2010
Messages
853
Reaction score
130
Location
Waupaca,WI
Rating - 75%
3   1   0
Contact seller
Have a 1973 steel crank 440 from a C body.It is apart but has very little ridge and is std bore.Everything is there and comes with a truck oil pan and 906 heads,cast intake and no exhaust manifolds.I was just going to re ring it so I will include new rings and new rod bearings. $450

Or will swap for a good running small block chevy 327,350,400 pre 1980 with the 4 bolt valve covers. I am located 6 miles northeast of Waupaca,WI
 
I will trade for whats listed or cash.I had brand x cars before I got hooked on mopars and still have a couple 65 Nova's that I haven't touched in 10 years so the time has come to get them going.
 
I gottaq 92 GMC 350 hangin on the engine stand. pulled valve cover, pretty clean. rolls over nicely. don`t know any more than that. replaced it w/ a hot 406 sbc for dragracing, then traded the truck off. bad is , I`m in okla.
 
440 to sell 002.jpg
440 to sell 001.jpg
440 to sell 007.jpg
440 to sell 006.jpg
440 to sell 005.jpg


Tin work,bolts all there just no pics of it
 
Last edited by a moderator:
Will swap for a running 318 or 360
I have a good running '83 318 that came out of my wrecked 65 dart. I'd be happy with just the short block & possibly the pan. shipping would probably kill us here (Lincoln Nebraska 68528). are the rings cast or moly? EDIT would you ship the short block?
 
Local pickup,i do have a 400 short block its 30 over and will need to be bored I will throw in with the 440 for a running small block and trans combo.
 
Status
Not open for further replies.
-
Back
Top