1974 dart parts

[moparmat2000]

hi all
havent been around for awhile. i am finally getting around to my 67 barracuda project and starting on it. i have a 1974 dart 4 door parts car i am using for the V8 K frame, torsion bars, brakes, axles and floor pan. as well as some misc parts that will fit off the dart. so this stuff is not up for grabs. what i do have for sale however is all the rest of the dart. it is a grandma fresh texas car so no, or little to no rust. typical granny green with green interior. i will start stripping this car tomorrow. and will continue as time and the weather allow me to do so.

i have the complete nose. hood, fenders, grille, and front bumper. minor dings, some minor surface rust on hood, NO rust thru. grill in good shape. this will fit swinger and dart sport from 73 on up $500 takes whole front clip, i am willing to piece out everything for different agreed on prices but would prefer to sell whole

trunklid, no rust thru. minor dings, lock cylinder removed, lock cylinder hole NOT mangled. will fit 2 door swinger 1970 to 1976 $200 OBO

taillamps fit 73 to 76 swinger good used shape no broken plastic $50 per side

rear bumper fits 73 to 76 swinger good used shape no dents minor chrome fading $75 OBO

good clean rust free 4 door doors with glass minus front door latches, outside handles, and mirrors. fits probably 70 to 76 dart 4 door. make offer on whole set of doors.

complete wiring harness for motor and body. $30

instrument cluster with bezel minus headlamp and wiper switches. VGC minor weal and discoloring on plasticchrome over 100K on odometer $100

Chrysler solid state AM radio with trim bezel and knobs VGC perfect for that resto. i assume fits 1970 to 1976 $75

A904 V8 torqueflight works, but dont know for how long. $100
A727 V8 torqueflight dont know if it works. not sure if big block or small block $100 or take em both for $150

i also will have some slant sick parts off the 1967 barracuda as well.

rebuildable slant sick Holley model 1920 1 BBL carby with air cleaner tin $35.00

small bolt pattern front brake drums $100 for the pair

small bolt pattern rear brake drums $100 for the pair

small bolt pattern steel rims with old tires $25 OBO for the set come and get em

1967 slant sick K frame with spindles and upper A arms and torsion bars $100 OBO

1967 slant sick 7&1/4 rear axle with leaf springs (no brake cables) $50 OBO

since i need the floor pan for my cuda i will try to save the framerails front and rear if anybody is interested in these. remember this was a west texas car and is virtually rust free.

i can ship small parts like the instrument cluster, radio, taillamps and wiring harness for the cost of the shipping. larger items you will have to arrange pickup. as far as the doors are concerned i am putting them out there but dont expect any takers on these even tho they are really nice. if i dont hear anything back on the doors within 7 days of the ad posting they will be loaded onto the scrap metal trailer with whats left of the body and sent to the scrap yard. so if you want them let me know throw me a price you want em for and come and get them

i cannot keep this stripped carcass lying around very long due to pesky neighbors so if you need any of these parts please email me quickly at moparmat2000@aol.com, or call me at 325 829 8800.

i am located in Abilene Texas

thanks
matt

 

[mopardrt]

PMd

 

[moparmat2000]

i will check on these today. i havent looked at the car since i purchased it 8 months ago as a donor car. its at my friends house but will be getting towed to my place to be parted out.

do you have any idea on a price for em?? not sure what to sell these for. if they are in good condition i was thinking $25 each plus shipping

LMK what you think, and or send me a counter offer
matt

 

[mopardrt]

if they are in perfuct conditon no chips or cracks let me know all of them that I have ever seen are worhless

 

[moparmat2000]

well you can add these to the worthless pile as well. they have smalll cracking in the lenses. pretty typical tho since this car has spent most of if not all of its life in west texas. anything else you may need off this parts car?? its approximately 2/3 of the way stripped now.

hope this helps.

 

[moparmat2000]

hi all
havent been around for awhile. i am finally getting around to my 67 barracuda project and starting on it. i have a 1974 dart 4 door parts car i am using for the V8 K frame, torsion bars, brakes, axles and floor pan. as well as some misc parts that will fit off the dart. so this stuff is not up for grabs. what i do have for sale however is all the rest of the dart. it is a grandma fresh texas car so no, or little to no rust. typical granny green with green interior. i will start stripping this car tomorrow. and will continue as time and the weather allow me to do so.

hood with only surface rust no dents $100

L/H front fender with splash guard minor dent NO RUST $125

R/H front fender with splash guard no dents NO RUST$125

upper header panel no rust no dents $75

grill no cracks or breaks lenses some slight cracking $75

headlamp doors pair R/H has some dings, L/H almost perfect $35

front bumper decent used shape for a driver chrome not peeling $100

trunklid, no rust thru. minor dings, lock cylinder removed, lock cylinder hole NOT mangled. will fit 2 door swinger 1970 to 1976 $100

taillamps fit 73 to 76 swinger good used shape no broken plastic $25 per side

rear bumper fits 73 to 76 swinger good used shape no dents minor chrome fading $75 OBO

i also will have some slant sick parts off the 1967 barracuda as well.

rebuildable slant sick Holley model 1920 1 BBL $35.00

small bolt pattern front brake drums $100 for the pair

small bolt pattern rear brake drums $100 for the pair

small bolt pattern steel rims with old tires $25 OBO for the set come and get em

1967 slant sick K frame with spindles and upper A arms and torsion bars $100 OBO

1967 slant sick 7&1/4 rear axle with leaf springs (no brake cables) $50 OBO

i can ship small parts but the larger items you will have to arrange pickup.

please email me at moparmat2000@aol.com, or call me at 325 829 8800.

i am located in Abilene Texas

thanks
matt