1997 dodge dakota v8 bellhousing

[dartcuda1]

Hi guys,I need to know how to put a 833 4sp in a 97 dodge dakota with a hyd system . I need to know the parts also. Thanks Mark

 

[Sublime12]

If its a v8 an 833 will bolt to the engine. Im sure there are companies that have a hydrolic setup for an 833. I have a 98 dakota and I have pondered this as well. i think the floor would take modification and Im not sure where the shifter would end up. I run a hurst shifter on my nv 3500 and it about touches the dash. It would be a bullet proof setup though! My dakota has a 408 stroker, and its pretty hard on drive line parts (as well as the driver)