[WANTED] 2.02 intake valves

[Babyblue66]

I'm looking for a set of eight 2.02 small block intake valves with 3/8 stems. Need not be new, just good usable valves. I took apart a running 340 and the intake valves are ground to the point of being sharp on the edges. Thanks

 

[GTX JOHN]

I should have a couple sets of OEM production mopar valves
with none or only one valve job I took out 40 or 50 years ago with thick margins.
I will look tomorrow night and find them and can send pictures I prefer them to
the Chinese Junk that you see a lot these days.

$75.00

PM me your phone or E Mail if interested?

 

[Babyblue66]

I should have a couple sets of OEM production mopar valves
with none or only one valve job I took out 40 or 50 years ago with thick margins.
I will look tomorrow night and find them and can send pictures I prefer them to
the Chinese Junk that you see a lot these days.

$75.00

PM me your phone or E Mail if interested?

Shot you a pm, if you received it, let me know. Thanks

 

[GTX JOHN]

Got it!
Suggest checking you exhaust valves closely
as they have a harder life than the intakes.

 

[Babyblue66]

Got it!
Suggest checking you exhaust valves closely
as they have a harder life than the intakes.

Surprisingly, they look nicer than the intakes. It's very possible they are not the stock valves. But I'm definitely interested in the intakes.