Mikes270dart Well-Known Member Joined Sep 26, 2010 Messages 368 Reaction score 126 Location Toronto Dec 2, 2011 #1 does anyone know what the CC for the stock heads are, In other words will compression go up or down when replacing stock 273 heads with 302 heads?
does anyone know what the CC for the stock heads are, In other words will compression go up or down when replacing stock 273 heads with 302 heads?
1 1wild&crazyguy Banned Joined Jul 11, 2009 Messages 7,751 Reaction score 239 Location Surrounded by mopar Dec 2, 2011 #2 my bone stock 302 heads measured 64cc's, they are like the 1st 'as cast' heads to actually measure as advertised.lol
my bone stock 302 heads measured 64cc's, they are like the 1st 'as cast' heads to actually measure as advertised.lol
65TerrorCuda Well-Known Member Joined Jul 26, 2009 Messages 1,273 Reaction score 847 Location Albuquerque, New Mexico Dec 2, 2011 #3 My '65 273 2-bbl heads were about 66cc, the '85 2-bbl 302's were 64cc, so after the 318 head gasket it's pretty close to the same.
My '65 273 2-bbl heads were about 66cc, the '85 2-bbl 302's were 64cc, so after the 318 head gasket it's pretty close to the same.
66fs FABO Gold Member FABO Gold Member Joined Sep 9, 2009 Messages 9,112 Reaction score 4,418 Location Greenwood, South Carolina Dec 4, 2011 #4 The largest chamber of my 273 was about 65cc. Had them milled .040 to get to 57.4? Should be very close to the same chamber size.
The largest chamber of my 273 was about 65cc. Had them milled .040 to get to 57.4? Should be very close to the same chamber size.