3 and 4 speed help!

[72dustr360]

Can someone please help on some info I got a /6 with a 3 speed and and I'm going to swap to a 318 4 speed and was wondering if the clutch components from the 3 speed would work on the 4 like the clutch fork and stuff like that and info will help!

 

[CudaJunction]

Yes as long as the bellhousing has the same front bearing retainer size.

 

[72dustr360]

Yes as long as the bellhousing has the same front bearing retainer size.

Thanks for the info!

 

[acpat]

Thanks for the info!

clutch fork from /6 is longer than a V-8. so no it will not work. basically where the rod ends coming out of the firewall at the z bar is where your interchange ends (z bar is not interchangeable). everything else needs to be V-8.