Pair of 308 heads off of a 89 D250 pickup. Engine ran when pulled. Had no cooling issues the 50k or so miles I drove it.
I washed these heads in the solvent tank, cleaned them up a bit with a wire wheel and sanding Bob. I could see NO cracks between valves where they usually crack.
They have NOT been magnafluxed or pressure tested.
$500 USD plus shipping from 53037.
I washed these heads in the solvent tank, cleaned them up a bit with a wire wheel and sanding Bob. I could see NO cracks between valves where they usually crack.
They have NOT been magnafluxed or pressure tested.
$500 USD plus shipping from 53037.
Last edited:
