[WANTED] 318 4 barrel kickdown linkage

[glhx]

looking to put the linkage back together .

throttle bracket for a 4 barrel

slider piece for the 4 barrel.

throttle linkage to carb attachment.

Holley 20-7 bracket for the 4160

 

[glhx]

All I need now is a kick down rod that goes from the bell crank to the csrburetor

I saw an extension piece
Edelbrock 8003 and 8004
Those are too small

I think it needs to be 3/8 fine thread
So far I haven't been able to find one. I'm thinking maybe take it to a machine shop and having it done. It I'd rather just get an original piece or get the extension

 

[H22A4]

The threaded extension pieces would be a simple solution if your existing 2bbl rod has a threaded end on it. If not, you'll need to use/borrow a tap and die kit to get threads on your kickdown rod to use the extension pieces.

These two threads might be useful reading for context:

[WANTED] - Looking for 4BBL kick-down assembly

[WANTED] - 4-bbl kick-down rod

 

[glhx]

The kick down for the 2 barrel is shorter and straight

A bend and an extension piece would have to be made.
The 8004 by edelbrock could be used. I can't even find my 2 barrel rod..

I am still looking for a 4 barrel slider linkage.

 

[glhx]

Not going to use the 2 barrel linkage

Want an adjustable 4 barrel linkage

 

[toolmanmike]

Here's a good thread: 2-Barrel to 4-Barrel Conversion

 

[glhx]

Thank you for that.

So far I have everything to get this done except the kick down rod for the 4 barrel.

So far it's been pretty hard to find