[WANTED] 318 forged crankshaft

[440BelII]

Searching for a good forged crankshaft for a 318 motor that I'm putting together. It can be from a 273, 318, or 340. I will take a crank or buy a whole motor if need be as long as it's reasonable because I only need the crank. I'm located in Western New York, between Buffalo and Rochester and need it to be within a reasonable driving distance. Let me know what you have if you can help. Thanks in advance.

 

[RustyRatRod]

Remember the 340 crank is different and balanced differently. So that could lead to a vibration if used with 318 internals, even though the balancers are both neutral.

 

[440BelII]

This is true, thanks for pointing that out. Ideally, trying to keep with a 273 or 318 crank.

 

[65 Dartman]

Are you looking for a pre68 small pocket crank or 68–later large pocket?

 

[Rocket]

PM sent

 

[gzig5]

I have both a 273 and a 318 crank, but I fear that shipping would kill the bargain.

 

[Mtrhead]

I was told only thing difference between the 340 crank is that hole drilled for balance and purposes and then they were shot peened