318 oil filter 90 degree adapter

[ClarkDart70]

I've been reading about this 90 degree adapter on my 318 due to it having a leak which is getting worse.
I priced a new seal for this which is $4, but my question is do I really need this adapter? If its taken off, will my filter screw straight on to the block as is or do I need additional parts in order to be able to do that?
If haven't taken it off yet to see whats under it, but I would perfer to do without the adpater if I have the choice. If I can't do without the adapter I'll just reseal it.

Any thoughts on this? This is the final leak to remedy before I move on to having the carb rebuilt.

Thanks,
Clark

 

[green1]

3 seals in it; go straight and use the shorter filter, if you can live with it.

 

[jefflock]

To go right off the block with your filter you will need to purchase a filter plate, the threaded nipple and the gaskets.

 

[charger70]

Yep 3 seals, the big one around the perimeter, one under the bolt head, and the cork one inside that slips on around the bolt shaft.

 

[ClarkDart70]

Anyone know where I can order the plate kit?