318 to 360 swap???

[jjlangdon]

any thoughts on the complexity of a 318 to 360 swap in a 65 Fury III???(i know it's an A body site.....)

bolt n go or a lot of pissing around???

 

[mullinax95]

Should be a bolt and go ... almost. You will have to look for the proper motor mounts .. unless I'm wrong and they match. Keep in mind I'm an A-body guy. You will like the 360 better with the longer stroke and more cubes. Good luck!

 

[Robbie2734]

Don't forget to change the flex plate to the externally balanced one

 

[TT'74]

only thing i can think of is the externally balances flexplate as has been stated. Mounts should be the same and everything should just pop off the 318 and back on the 360.

 

[fishman]

You will have some issues with the lower hose going to the rad. And may be some alt brackets different.

 

[Robbie2734]

only thing i can think of is the externally balances flexplate as has been stated. Mounts should be the same and everything should just pop off the 318 and back on the 360.

The drivers side is about 1/2 inch narrower, so you need the flex plate , the drivers side mount and ambition. Easy job!!