[SOLD] 340/372 stroker and new tci trans

-
Status
Not open for further replies.

71scamp78

Well-Known Member
Joined
Sep 28, 2014
Messages
1,341
Reaction score
312
Location
terre haute indiana
Rating - 100%
8   0   0
Contact seller
have fresh 72 340 bored .030 over with a Scat stoker kit to make it a 372. Has forged I beam rods and Icon forged pistons with scat cast crank that's balanced internally. Pistons sit just .001 below deck for a nice 10 to 1 compression. Block was bored and honed with torque plate as well. Arp main and head bolts with chrome 5 quart oil pan. New water pump new magnum style Pro Max heads 1.92 I take and 1.62 exhaust. Has Harland Sharp 1.6 non adjustable roller rockers with Comp hydraulic cam EX268-10 cam. Lift is .477 and .480 duration is @.50 is 224- 230. With the 1.6 ratio rockers it puts lift at .509 /.512. Comes with new Mopar performance distributor as well. Edelbrock air gap I take and nice Ansen polished aluminum valve covers. Engine was just built last summer has been turned and primed a several times. The trans is a brand new TCI street fighter that has never been out of plastic wrap. It's 2700 shipped for trans alone from Jegs. Not looking to separate but it's possibly if price is right for engine. Located in Terre Haute , Indiana could possibly ship or meet halfway. 6900 cash pm if interested

20230521_101816.jpg


20230521_105941.jpg


20230521_101838.jpg


20230521_101845.jpg


20230521_101826.jpg


received_1355254035042752.jpeg


20230521_104209.jpg


20230521_104218.jpg
 
I’d be interested in the short block so we’d just need somebody to take the top end off on the way to Washington.
 
Dear Boosted
Why did you disagree ( Red X ) I sent a P.M. to 71scamp78 interested in the motor only.
 
Status
Not open for further replies.
-
Back
Top