Oct 9, 2007 #1 7 71Demon340 Banned Joined Jan 10, 2006 Messages 144 Reaction score 2 Location SE Texas Can someone tell me what the allowable/ideal clearance is for the mains and rods on a 340?
Oct 9, 2007 #2 B BJR Racing Well-Known Member Joined Oct 11, 2005 Messages 1,530 Reaction score 3 Location Dallas,Ga. The allowable is .001-.003 on the rods and .0015-.0035 on the mains, I would put both at .003 then run a good high volume pump.
The allowable is .001-.003 on the rods and .0015-.0035 on the mains, I would put both at .003 then run a good high volume pump.
