[WANTED] 340 or 360 heads, in NorCal

[hellfirechrome]

Looking for a pair of 340 or 360 heads, stock is preferred (runners strongly preferred!) and complete with valve train? Missing rocker arms/shafts is negotiable.
Not looking to dig too deep into custom stuff on this particular engine.
Hit me up! Have cash, will travel.

 

[pomonamissel]

Looking for a pair of 340 or 360 heads, stock is preferred (runners strongly preferred!) and complete with valve train? Missing rocker arms/shafts is negotiable.
Not looking to dig too deep into custom stuff on this particular engine.
Hit me up! Have cash, will travel.

i've got a pair that got about 600 miles on them , no spring or retainers on them just valve . have some stuff to assemble them .

 

[mpd12150]

Looking for a pair of 340 or 360 heads, stock is preferred (runners strongly preferred!) and complete with valve train? Missing rocker arms/shafts is negotiable.
Not looking to dig too deep into custom stuff on this particular engine.
Hit me up! Have cash, will travel.

I have a set of 360 heads that I pulled off my running and driving 360 out of my Dart.

They my need some cleaning but they are good and complete with rails and rockers.

I live in Bismarck ND so you will have to figure out shipping. They are runners.

 

[hellfirechrome]

Looks like I need roller cam heads guys... Any luck?

 

[mpd12150]

Looks like I need roller cam heads guys... Any luck?

Mine are 1978 casting...so no dice with these...

That said...I do know the local wrecking yard here has a 91 360 complete with distributor to oil pan for $300. You just need to figure out how to get it to you. If you want I can get you their contact info.

 

[crackedback]

Roller cam heads???

 

[pomonamissel]

then your looking for 5.2 or 5.9 heads . new bread sbm . they use no rocker shaft and oil thru the pushrods .

 

[pomonamissel]

check pick n pull's inventory info

 

[crackedback]

Early 360 rollers had shaft oiled rockers on them, that's why saying roller heads makes no sense.

 

[pomonamissel]

crackerback , thanks for that for thank info , but didn't those come under the 5.9 mag's . what year did they stop shaft mounted rockers ? and was the 318 or 5.2 included in that design ?

 

[2manymopars]

Looks like I need roller cam heads guys... Any luck?

I have several sets off late La 360 roller cam motors and a good set of 5.9 magnum heads.

 

[csx711]

I have a set of magnum roller heads. Im here in Nor Cal. They have low miles for running engine.

PM Me

Herman

 

[pomonamissel]

cool thats right next door to you . csx711 has what you need .