[SOLD] 340 "X" HEADS

[Jeremy]

SET OF BUILT 340 X HEADS USED VERY LITTLE, STAINLESS STEEL VALVES, BRONZE GUIDES, CHROME MOLY RETAINERS AND 10 DEGREE KEEPERS,AND STRONG SINGLE VALVE SPRINGS.

THEY HAVE BEEN MILLED TO THE FACTORY SPECS. AND HAVE A 3 ANGLE VALVE JOB. 2.02 INTAKE VALVES, SHIPPED FROM TEXAS(77510). $600.00 PLUS SHIPPING. PLEASE TEXT JERRY AT 409-795-0644.

 

[rumblefish360]

Sorry, please explain “Miller to factory spec.”

 

[Jeremy]

Milled to factory specs. The combustion chambers from the factory should measure 55.7 cc's and these were milled to make them very close to this. They usually come way off from this.

 

[66fs]

look like factory valves.

 

[Jeremy]

Might look like to you but there not.

 

[Jeremy]

h

 

[Jeremy]

here is picture that these heads were on several years ago, with a stock 340 engine and a 904 trans it was in the 10's most of the time.