[SOLD] 360 forged pistons and rods

[modart440]

360 forged pistons and rods with ARP rod bolts pistons are 30 over with cast rings pistons are in great shape part number on the pistons is L2405 had these in a 360 for a short period of time 80 down in the hole with 63cc heads and 40 thou head gasket was 8.5:1 compression 150.00 located near toronto ontario

 

[modart440]

100.00 for the pistons and rods
thanks

 

[lucky13]

I can't tell from the pics, but are these setup with a floating pin?

 

[modart440]

no they are pressed pin
thanks

 

[highflyer]

hello..do you still have these...jim

 

[modart440]

bump
thanks

 

[modart440]

still for sale 75.00 plus shipping
thanks

 

[Abodybomber]

How much to 93430 ,California.Thanks,for your time.

 

[mopardude318]

hmm....might be good for a 360 blower engine...with the RHS heads I have....hmmm....

 

[MiradaMegaCab]

hmm....might be good for a 360 blower engine...with the RHS heads I have....hmmm....

:cheers:You can do it....all night long!!

Get yourself some 360degree full groove main bearings to feed plenty of oil to your rod bearings...Use plenty of lube!! LOL

Bump

 

[Abodybomber]

Agree.Seen a short block milled to match,to zero deck.The pistons live today,can't say the same for the block.250 spray hits,over 7 years do that.(with a Thermoquad!)

 

[william]

P/M sent

 

[modart440]

pm replied to your up William
thnx

 

[modart440]

hey William 2 pm's at you with no reply.Let me know please
thnx