360 into 73 K-member - which rubber mount

[tamanko]

Swapping 318 for a 360 and need rubber mounts. I can find two which look to differ in thickness. I would like to use the thinner to provide a little additional clearance between the header and torsion bar. Does anyone have any experience with this?

Thicker Anchor 2265

Thinner Anchor 2266

Frank

 

[SRT_DSTRHOLC]

Umm....you said 73...those are not the correct mounts. 73 has spool mounts

 

[Dusteriffic]

Umm....you said 73...those are not the correct mounts. 73 has spool mounts

Ditto. You need spool mounts for a '73 k-frame.

 

[tamanko]

I thought it been swapped. Might still be a 71. Here are a few pictures:

Frank

 

[RichardJ916]

Check this site out......
http://www.bigblockdart.com/techpages/techindex.shtml

 

[no poseur]

That's a 72 and down K frame.