1bad360duster
Well-Known Member
- Joined
- Dec 2, 2009
- Messages
- 303
- Reaction score
- 153
360 hydraulic roller used in my magnum. Was a grind from Scott brown. Don’t remember the exact specs but was around 230 at .050 .550 lift 110 lsa if I remember correct. I used this cam in a bone stock 5.9 magnum from the junkyard with an rpm air gap and 650, with 3000 stall converter and ran 12.20s on motor, low 11s on nitrous 3300 lb duster. 190$ shipped or located in lower ny
Last edited:
