383 build!

-
P

petreed150

Well-Known Member
Joined
Jan 3, 2012
Messages
202
Reaction score
0
Location
LaFollette TN
I know it aint going in an abody but this is for my 83 D150!30 over 383 with KB400 pistons,Comp Magnum 280h cam,Aerohead 452 heads with 2.14/1.81 valves,Stock 4barrel intake with slight portwork,650 holley dp,Hooker headers and stock rockers!Should be around 9.3 comp with pistons .024 in the hole!727 with Boss Hogg 2400 stall completely rebuilt with shiftkit!Rear gear as of now is 8.25 with 3.55!But got 8.75 housing and rebuild my 489 case with 4.10 and auburn suregrip!Here is pics and let me know what all you guys think!
 

Attachments

  • 0313131626.jpg
    82.3 KB · Views: 457
  • 0313131626a.jpg
    89.7 KB · Views: 403
  • 0313131636.jpg
    76.3 KB · Views: 425
  • 0402132153.jpg
    81.5 KB · Views: 384
  • 0416131823a.jpg
    98.1 KB · Views: 449
Cool. I am doing one similar for my 65 coronet. Stosk stroke 383, .030 over, KB400 zero deck block, 516 closed chamber heads CC'd to 80. Compression at 10.4 with .039 quench, Lunasty 260/270 @ .050. 540/563 lift.
 
Looking good man! My favorite motor - Mopar 383. My 68 RR is still stock, but I have another complete 68 383 motor on the engine stand for my Scamp. I'll be following this thread.
 
Looks good, what did your d150 have before for an engine? It will sure haul *** now. My 440 that i built twists mine sideways a bit when you come onto it from a stop. Then when you let off all the weight goes back down on the front suspension. Its very sweet :)
 
It had a 318 with stock 340 cam.Ran decent but motor was wore out.Pulled it and now waiting on this one.Hope it runs good.Oh and that weedeater piston was joke to one of my buddies LOL!He a ford guy!
 
You must log in or register to reply here.
-

Back
Top