383 Swap in 1976 Duster

[TommieDuster76]

I have a 1976 Duster that came with a 225 6 cyl. Both the Engine and Wire Harness' are long gone. I am installing a 383 Big Block. Where can I get the wire harness and does anyone have any advice on this swap?

 

[JDMopar]

You should be able to buy motor mounts to swap the big block to the slant 6 K frame, from Schumaker engine mounts. @RAT ROD AL had a wiring harness from a Dart he parted out. It is a slant 6 harness, but you just need to splice wires to make it fit.

[FOR SALE] - Parting out 75 Dart

Next one up in the chop shop ! Slant six, 904, big bolt pattern 7.25. Glass is good. Disc brakes. Power Steering All the sheets metal is shot. Any thing in here someone need ? peanut head 225 spins by hand. Column shift linkage Kick down linkage Wire harnesses this was a complete engine...

www.forabodiesonly.com

 

[TommieDuster76]

Will the 1975 Harness work with the 1976 Bulkhead? I've learned its different. It has Four Connectors, See attached photo.

 

[JDMopar]

I don't know for sure. Check with Al and see what style the one he has is.

 

[Moparpuller]

Classic industries has engine harnesses for the swap. I got one for my 68 dart already setup for the electronic ignition conversion