3d printed dash bezel.

[go-fish]

The guy I am working with claims to have the largest printer in Canada. He 3d printed a camper.

Cley

He probably has a lot invested. The big ones and metal printing ones are on the same investment level as CNC machines.
Good luck. I’ll put this thread on “watch”

 

[moparmat2000]

It can be printed in 2 parts and glued together. I heard that the PETG plastic can hold up to high heat without deformation.

 

[go-fish]

PETG is better than ABS. The Creality machine we have had a hard time with ABS but PETG is smooth. All the good qualities of ABS and more. Can be very slightly more expensive ($5?).

 

[RogerRamRod]

I have a 68, and I want to do something, but not sure what yet. Here to watch, but don't know where the popcorn bucket is.

 

[lilwarlock]

I had my Dash 3D printed for a 65 dodge Dart. The original had 3 Retangle windows for the gauages. Not cheap, I think was around $470 printed in ABS plastic

 

[Dana67Dart]

Not cheap, I think was around $470 printed in ABS plastic

I had a rad shroud printed and the cheapest was 221.00. it was for test fitting so the material was not important. I left it in the sun at a car show and it tacoed on me!