4 bbl throttle/kickdown linkage

[rmchrgr]

Converting a 318 2bbl to 4bbl., need 4bbl specific linkage.

Looking for the long accelerator rod that attaches from the bell crank to the carb. and has the throttle lever stud spring tab on it. These are specific to 4bbl applications, must be from a small block 4bbl car, 2bbl ones are too short. I also need the 4bbl specific bracket that mounts to the back of the manifold. This is the bracket that fastens the kickdown linkage bell crank and where the throttle cable to attaches.

Let me know what you got, specs, pics and prices are always helpful.

See this thread, post #49 on Johnny Dart's car to see what I need.
http://www.forabodiesonly.com/mopar/showthread.php?t=64895&page=3

Greg

[email protected]

 

[Mark Nixon]

I have it 2 ways, either the whole works from transmission arm to carb, or just the bracket and carb-to bellcrank rod.

Mark.

 

[fishy68]

I have a complete setup for sale. The rod is the long one but the manifold bracket was a 2 barrel one that I added the adapter to so it sets higher and inline with the carb better on a high rise manifold. You can take it off it yours is a low rise manifold. The paint is pretty scratched up on the linkage so it'll need repainting. $75 shipped via priority.

Oh yeah. The throttle cable is included too.