4 spd. floor hump replacement.

[twotone68]

rayer:Hi everybody! My 68 dart came originally with a 3 on the tree,the original owner had it converted to the floor. They butchered the floor. I just got the replacement hump from,Passion perf. and was hoping someone can give me measurements or dimensions at certain points to get it properly placed to cut, tack, weld in place.

 

[pntastar69]

It basically centers itself. Lay it on the floor, trace the outline on the floor, measure approx. 1.5" inward and cut away. Trim as necessary for linkage clearance. I had mine tack welded every 3". Remember not to cut thru the tunnel brace underneath.

 

[twotone68]

Thank you very much for the correct or proper way to cut and install properly.Very much appreciated,I'll let you know how it turns out.:glasses2::glasses2::thumrigh: