Baxter61
Well-Known Member
Putting my 410 shortblock up for sale. I know shipping may be too much for many but offering it anyway. This is a budget deal, not a high dollar all out race motor. The crank, rods, and pistons were used and checked out good by the machine shop. The services the machine shop performed were:
Check everything for cracks
Hot tank and clean block
Check deck for flatness
Line hone (ARP main studs installed)
Bore and hone cylinders
Install new cam bearings
Check balance of crank (new OE type balancer and B&M flexplate used, balanced for use with neutral converter)
The internals are all new except for the aforementioned crank, rods, rod bolts, and pistons. The complete list is:
Scat Cast Crank - SCA-936020
KB 356 +40 pistons - UEM-KB356-040
Speed-Pro 3/4 groove main bearings - SLP-120M
Perfect Circle rod bearings - CB481p
Mahle brand moly coated piston rings - PCR-40564CP-040
Melling standard volume oil pump - MEL-M72
Melling pickup tube - MEL-72-S2
Fel-Pro gasket set - FEL-KS2109
B&M flexplate - BMM-10236 (used)
OE replacement balancer (do not have number)
Chrome oil pan (bought from eBay)
ARP main studs - ARP-140-5401
$2200 plus shipping. For extra I also have a NOS MP .557 cam, a MP timing chain, 915 J heads. PM if interested. Located in Oregon City, OR and can take to shipping terminal of your choice.
Check everything for cracks
Hot tank and clean block
Check deck for flatness
Line hone (ARP main studs installed)
Bore and hone cylinders
Install new cam bearings
Check balance of crank (new OE type balancer and B&M flexplate used, balanced for use with neutral converter)
The internals are all new except for the aforementioned crank, rods, rod bolts, and pistons. The complete list is:
Scat Cast Crank - SCA-936020
KB 356 +40 pistons - UEM-KB356-040
Speed-Pro 3/4 groove main bearings - SLP-120M
Perfect Circle rod bearings - CB481p
Mahle brand moly coated piston rings - PCR-40564CP-040
Melling standard volume oil pump - MEL-M72
Melling pickup tube - MEL-72-S2
Fel-Pro gasket set - FEL-KS2109
B&M flexplate - BMM-10236 (used)
OE replacement balancer (do not have number)
Chrome oil pan (bought from eBay)
ARP main studs - ARP-140-5401
$2200 plus shipping. For extra I also have a NOS MP .557 cam, a MP timing chain, 915 J heads. PM if interested. Located in Oregon City, OR and can take to shipping terminal of your choice.
