[FOR SALE] 413 built bracket engine drop in ready

-
Status
Not open for further replies.

#MadMax

Well-Known Member
Joined
May 10, 2019
Messages
138
Reaction score
94
Location
44826
Rating - 0%
0   0   0
Contact seller
Hi I have a 413 built engine. This is a drop in ready to go today.

The pistons are original max wedge 413 high compression pistons part number in pictures. The block is a 1972 industry block standard bore. Ly rod and steel crank and pistons all balanced together and drilled for a manual transmission. The heads are 1967 915 heads 2.08/1.74 Bronze guides Triple comp cam Springs 10 Degree lock retainers. Cam is a comp cam 555 lift have cam card. Double roller timing chain. The intake is a super victor 2891 and has a king demon 1095 carburetor. Has a 7qt oil pan with windage tray and oil sling. C.a.t sfi Fluid dampener
New Alternator and water pump new plugs and wires and cap and rotor. Comes as pictured

Location is collins ohio 44826
Price is $ 8,500

20240103_163156.jpg


20240103_163213.jpg


20240103_163333.jpg


20240103_163348.jpg


20240103_163416.jpg


20231231_112331.jpg


20231230_123415.jpg


20231230_123038.jpg


20231215_155512.jpg


20231215_155455.jpg
 
Last edited:
May be good to post the cam card so folks can get an idea of the motor’s intended RPM range.

May also be good to post valve spring part number and installed height so folks can get an idea of the spring loads. Your text says triple springs (did you mean dual with damper?) which could be a lot for the flat tappet cam (you didn’t say solid or hydraulic) unless maybe they’re set up light for reasons.

Thanks!
 
Status
Not open for further replies.
-
Back
Top