440 - 4 speed- dana60 - hooker fenderwells - Exhaust build.

[1967formulaS]

Hi guys,

Any of you guys running a 440- 4 speed- dana 60 and fenderwell headers in a 67-69 fastback barracuda. Id like to see some pics from under the car. I am planning my exhaust build and am looking for some ideas.
I am using the 5215HKR super pro comp headers , but want to go back down to 2.5" for the headers back and dump over the axle. Not sure if i will go X pipe or h pipe yet, so any suggestions are appreciated as always.

cheers.:burnout:

 

[1967formulaS]

Anyone got pics?

 

[Daves69]

Here's one in post 9 of mine. Custom bent tubes to go back under and out the back. Can't get you any more pictures right now, sorry.

http://www.forabodiesonly.com/mopar/showthread.php?t=302307

 

[1967formulaS]

Cool, thanks.

 

[DusTed74]

I just started to work on my exhaust system on my Demon. It's a big block and I'm also using Hooker fendewell headers. But I noticed something the other night. The collector on the drivers side sits approximately 1 1/2" inches lower than the passenger side. Is this correct or are my headers FUBAR?

Ted

 

[Daves69]

I never really noticed if mine were different side to side. If they are its definitely negligible. Although I can't run out to the garage to verify right now I found an old picture scan taken after the headers were installed.

 

[440dartsport]

Here is a pic of my old set up. This was a 440 with hooker fender wells. 3" exhaust.

 

[tarvin890]

Here is a pic of my old set up. This was a 440 with hooker fender wells. 3" exhaust.

lovely done exhaust!
:burnout:

 

[DusTed74]

Here's what I just finished up for my Demon. I didn't bother with an X or H pipe. I just ran them straight back to the mufflers.

 

[1967formulaS]

That looks sweet. Nice job. What mufflers are you using?

 

[DusTed74]

That looks sweet. Nice job. What mufflers are you using?

They are from Summit.
http://www.summitracing.com/parts/sum-638230/overview/