[WANTED] 440 cast crank flywheel 10.5 in.

[63spf]

Aloha, Just found out my flywheel came out of a 68 / 383 Charger and wont work on my 75 /440 cast crank for my 67 barracuda. Looks like it might be an 10.5 or 11 in . My bad, PLEASE HELP ??? , Thank you. P.S. " I heard maybe a 318 car or truck flywheel might work" ?

 

[rklein383]

Aloha, Just found out my flywheel came out of a 68 / 383 Charger and wont work on my 75 /440 cast crank for my 67 barracuda. Looks like it might be an 10.5 or 11 in . My bad, PLEASE HELP ??? , Thank you. P.S. " I heard maybe a 318 car or truck flywheel might work" ?

View attachment 1715037713

View attachment 1715037714

Try 440source.com

 

[63spf]

still looking

 

[Moparparts]

still looking

If your flywheel is neutral balance your machine shop can balance it for use with a cast crank

 

[63spf]

Hate to use a $500 Centerforce flywheel . but will if I have to .

 

[Moparparts]

Hate to use a $500 Centerforce flywheel . but will if I have to .

A friend recently had his done at our local machine shop, and if memory serves me correctly, it was about $65. He used that flywheel and the correct cast crank balancer, and has no issues

 

[63spf]

Yes , but I would rather save it for my 426 or 440 steel crank. The cast crank flywheels are more common and cheaper or so I was told. But if I cant find one I will be drilling it.

 

[Moparparts]

Yes , but I would rather save it for my 426 or 440 steel crank. The cast crank flywheels are more common and cheaper or so I was told. But if I cant find one I will be drilling it.

I see, just wanted to try to save you some $$

 

[63spf]

I see, just wanted to try to save you some $$

Many thanks, Too funny but that $65 in mainland is $125 here on the Big Island to do the Mach. work

 

[Moparparts]

Many thanks, Too funny but that $65 in mainland is $125 here on the Big Island to do the Mach. work

Got to pay for that nice climate!