[SOLD] 440 crank

[oldkimmer]

Balanced forged crank turned .010/.010 Counter weights are turned down also. Dyno time only. Went to a stroker. $400.00 usd plus shipping. Thanks. Kim

 

[oldkimmer]

Bump

 

[oldkimmer]

Ttt

 

[oldkimmer]

Bumperoo

 

[oldkimmer]

Ttt

 

[oldkimmer]

Bump

 

[oldkimmer]

Ttt

 

[oldkimmer]

Bump

 

[Tbone416]

Where are you located in what is the main size

 

[oldkimmer]

I’m up in Canada. It’s a 440 crank that’s been ground .010 thou under. U will need .010 thou over size 440 bearings for it. I believe stock main size is 2.750. So this would be 2.740. If u wanted to use it in a 373/400 block u will need to have the mains turned down to 2.625 I believe. Kim

 

[Rassnasty82]

I’m up in Canada. It’s a 440 crank that’s been ground .010 thou under. U will need .010 thou over size 440 bearings for it. I believe stock main size is 2.750. So this would be 2.740. If u wanted to use it in a 373/400 block u will need to have the mains turned down to 2.625 I believe. Kim

so this could be used in a 383 block. where would that put the motor if the pistons are 40 over already?

 

[oldkimmer]

432. U will need the appropriate rod and piston. Kim

 

[oldkimmer]

Bump

 

[oldkimmer]

Bumperoo

 

[oldkimmer]

Bumpy

 

[oldkimmer]

I also have a stock dampener for this crank for $50.00 extra. Kim

 

[oldkimmer]

Bump

 

[oldkimmer]

Bump

 

[oldkimmer]

Bump

 

[oldkimmer]

Pending