5.2L crank sensor

[mprhoodlum]

I'm installing a 2001 5.2L Magnum engine onto a 904 trans. Can anybody give me the location, shape, and dimensions for the notch I need to grind in the bellhousing of the 904 to give access for the crank sensor?
Thanks

 

[spikekid999]

Probably be easiest to measure it from the location on the engine block where it mounts, then measure the crank sensor for the size of hole to cut

 

[mprhoodlum]

Well - I thought that too. they make a grommet to fit the hole so I wanted to cut to match the grommet in case I find one.

 

[spikekid999]

Grommet ain't that big of a deal, I pulled it off my 99 ram when I changed the crank sensor because of its location its a pita to get to

 

[mprhoodlum]

OK - Cool beans! So how about running outside and looking, come back and give me a configuration of the Freakin' hole!

 

[spikekid999]

Easier said then done, my truck is 1500 miles away

 

[mprhoodlum]

Is there not anybody out there that can answer a simple question other than this irritating teenager?