5.7 forged pistons

[mcat]

i am looking for the cheapest set of forged 5.7 pistons made. i dont need "quality" lectures, just cheap forged pistons 3.917 bore. who and where do i find them?
thanks

 

[72BBSwinger]

What is cheap? These are the best deal I can find, when you figure they come with rings and pins and locks.
https://www.flatlanderracing.com/wisecopistons-chrys-junkyard.html

 

[hemijoejr]

Those wiseco pistons are the only stocking pistons I know of with the right pin size for the stock rods.

 

[mcat]

Those wiseco pistons are the only stocking pistons I know of with the right pin size for the stock rods.

good point, there is also a complete drop in for a 5.7....K0105XS

 

[hemijoejr]

The cheapest way to go fully forged on a 5.7L is 6.1L crank, molnar rods and KB Icon forged pistons. I have a set. they are pretty nice. Even the Molnar rods with the correct big end size have a .927 pin. The stock 5.7L rods are only good for around 500hp.

 

[Hellcat Cuda]

I believe Probes are fairly inexpensive