5.9 swap 73 dart sport

Discussion in 'Small Block Mopar Engine' started by dartsport1973, Oct 10, 2018.

  1. dartsport1973

    dartsport1973 Member

    Messages:
    11
    Likes Received:
    17
    Joined:
    Oct 10, 2018
    Location:
    arkansas
    Local Time:
    1:42 AM
    hello, I've had a 73 dodge dart sport body for a while and I've recently got a 2000 Durango 2x4 to use in my swap. Plan is to use everything from the 5.9 to the dash cluster in the dart.
     
  2. Wyrmrider

    Wyrmrider Well-Known Member

    Messages:
    871
    Likes Received:
    275
    Joined:
    Sep 5, 2016
    Location:
    los angeles
    Local Time:
    12:42 AM
    Welcome
    and your question is???
     
  3. TrailBeast

    TrailBeast Slightly Twisted Member

    Messages:
    18,929
    Likes Received:
    5141
    Joined:
    Mar 11, 2011
    Location:
    Arizona
    View My Photos
    Local Time:
    1:42 AM
    Maybe he's just sayin.:D
     
  4. dartsport1973

    dartsport1973 Member

    Messages:
    11
    Likes Received:
    17
    Joined:
    Oct 10, 2018
    Location:
    arkansas
    Local Time:
    1:42 AM
    Ya I was just saying but I do have some questions. What pick up tube do I use? The one off the LA 360 with the pan I'm using or on for a 5.9 magnum. And one the rest speed sensor, any idea how to get around that ordo I use the Durango or a Dakota rear end?

    IMG_20180518_201656263_LL.jpg

    received_1838249006253221.jpeg
     
  5. Peter Bates

    Peter Bates 1973 Cuda owner for 36yrs

    Messages:
    137
    Likes Received:
    105
    Joined:
    Aug 25, 2018
    Location:
    Sylvania ohio
    Local Time:
    3:42 AM
    Look at the center pan kits from Moroso. I think Minnesota was the 31000. I'd use a stock mopar gasket though the Moroso cork crown sucks.
     
    • Like Like x 1
    • Jadaharabi

      Jadaharabi FABO Gold Member FABO Gold Member

      Messages:
      3,098
      Likes Received:
      2454
      Joined:
      Jan 8, 2016
      Location:
      Peoria, Illinois
      Local Time:
      2:42 AM
      • Like Like x 1
      • Wyrmrider

        Wyrmrider Well-Known Member

        Messages:
        871
        Likes Received:
        275
        Joined:
        Sep 5, 2016
        Location:
        los angeles
        Local Time:
        12:42 AM
        use the largest diameter tube with the greatest smoothest bends you can fit
        suction side helps more than pressure side but blend and gasket match the pressure side too
         
        • Like Like x 1