Does anyone have a diagram or schematic that shows the wiring pinout between the 23 pin transmission connector on a 545 RFE and the 10 pin shifter connector (2008 & up) Charger or Grand Cherokee floor shifter
The shifter and the trans are not wired together. The trans wiring goes to the controller. What year trans and wiring/controller are you working with? What are you trying to do?
I'm trying to wire the shifter so that I can electronically shift the transmission to the lower gears using a factory shifter. The trans is a 2009-2013 545RFE. The wiring was supplied with the engine/trans as part of the package from Bouchillon Performance.