64 Dart 270 moulding and trim

[Stiffler]

does anyone have experience with and/or know where to get the clips for the moulding on this car? I want to remove a lot of the trim so I can buff/clear the patina and polish the moulding while it’s off the car. I’m most interested in removing the large fender and door moulding. I’m hesitant to start though as I don’t see any clips online anywhere. I’m curious to hear about others experience doing this as well.

Thank you!

 

[retroron]

Restoration Hardware, Mega Parts, Mr Moparts, classic industries.
Do a little on line research you'll find more

 

[Stiffler]

well, the thing is, I don't know what they look like. I don't want to remove the trim now either, in cause of difficulty finding the clips....vicious cycle!

 

[Claydart]

I would try and take one of the smaller pieces off and then start to look for the clips. I believe that you can slide one of the door moldings off after you remove the one clip that has a screw holding it. Look under the lip near the front of the door, IIRC, there should be a nut under there. After you pull that nut off, you should be able to slide the molding off.

 

[Claydart]

I have some 4-door moldings if you break or bend one.