i have 5 early A body cars, I would like to thin the herd some. keeping the 65 cuda for sure. offering 63, 64, 65 dart gts, and 62 lancer. I will list separate ads for each as time allows. I will sell off only 2 of these. just want to thin down not sell out!!! these are cars I picked up for myself, not to flip. I have bunches of pics. if interested, I can send all the pics I have plus more.
64 dart gt, orginally a slant car. this is an extremely good body. NO rust in floors or FRAME. it only had 3-4 small rust spots the size of a quarter. I have cut out the rust, welding in metal patches, ground, epoxy primed that, filler applied, finished, reprimed with epoxy primer. the car was very straight, I sanded it to bare metal except engine compartment. it was epoxy primed, and a few small dings finished off with filler. 99% percent straight ready for sanding primer. would be hard to find better body.
the interior is all there. the door panels ( front and back) are original and VERY nice. seats need new molded foam, good glass, stainless trim. the grill has some light dings. I have 1 perfect taillight and another good one that lacks the trim. needs good headlight bezels. I have 2 that will do for driver barely.
7 1/4, pushbutton. all dash stuff is there.
I have a good early 70's 318 truck motor. got it from friends that tell me its good. I will sell with or with engine. missing tranny.
price is $3500 with engine, $3100 without.
I will list the other cars separately. 63 dart gt, 65 dart gt, 62 lancer ( 2 door post).... they are priced at $2300 to $3600. two of the 3 are already painted..
thanks BILL
I HAVE plenty of pics of all these cars before any work was done on them.....
64 dart gt, orginally a slant car. this is an extremely good body. NO rust in floors or FRAME. it only had 3-4 small rust spots the size of a quarter. I have cut out the rust, welding in metal patches, ground, epoxy primed that, filler applied, finished, reprimed with epoxy primer. the car was very straight, I sanded it to bare metal except engine compartment. it was epoxy primed, and a few small dings finished off with filler. 99% percent straight ready for sanding primer. would be hard to find better body.
the interior is all there. the door panels ( front and back) are original and VERY nice. seats need new molded foam, good glass, stainless trim. the grill has some light dings. I have 1 perfect taillight and another good one that lacks the trim. needs good headlight bezels. I have 2 that will do for driver barely.
7 1/4, pushbutton. all dash stuff is there.
I have a good early 70's 318 truck motor. got it from friends that tell me its good. I will sell with or with engine. missing tranny.
price is $3500 with engine, $3100 without.
I will list the other cars separately. 63 dart gt, 65 dart gt, 62 lancer ( 2 door post).... they are priced at $2300 to $3600. two of the 3 are already painted..
thanks BILL
I HAVE plenty of pics of all these cars before any work was done on them.....
