65 Formula S tach question

[pbiggs]

Hi...trying to piece back together my 65 S. The tach was in a box when I got the car and now I want to reinstall it. The question is what kind of mounting screws, bolts or studs were used to tighten the unit in the dash. The four threading stud housings on the tach appear to need a special washer or retainer to mount properly.
Thanks, Pat

 

[1969cudaman]

yes, they are small cups...I'll see if I can get you a picture.

 

[pbiggs]

yes, they are small cups...I'll see if I can get you a picture.

Thanks...did they use studs or screws with the caps?
Thanks a bunch, Pat

 

[1969cudaman]

Philip screws with the cup washers...sry haven't had a chance to find a few spare washers. ill keep looking. daniel

 

[bamacuda]

If anyone knows, Daniel does. If he can't find one, i have my tach taken out and apart to detail it. I can get a photo. They are sort of a "cylindrical cup" spacer that a phillips screw goes through, one at each corner.

 

[dart64gt]

In MY 65 S car itook the rouung little box that was in the drivers side kick panel and someboby on here hada electonix brain that is update for
them and it fit prefect with a little work and now the factory tact is working like champ. Thanks FABO