[FOR SALE] 67 & 68 Barracuda 383S Hood spears Restored

-
Status
Not open for further replies.
hemifiedbird

hemifiedbird

Well-Known Member
Joined
Jul 25, 2015
Messages
197
Reaction score
332
Location
Red Deer Alberta
Rating - 0%
0   0   0
Contact seller
67 & 68 Barracuda 383 S Hood Spears. These were restored by All trim of Sandy Oregon. All pins are intact on the back. Very nice Spears. $1000.00 plus shipping

IMG_6296.jpeg


IMG_6297.jpeg


IMG_6298.jpeg


IMG_6301.jpeg


IMG_6300.jpeg


IMG_6299.jpeg


IMG_6302.jpeg


IMG_6303.jpeg


IMG_6304.jpeg
 
If Mike @ All Trim did them your barely breaking even... Nice work, actually one of the two finest trim guys I've seen... But that don't come cheap...
 
Are those all pits that were never fixed and chromed over. Or new pits starting since being restored. I’ve never seen Altrim do work like that before
 

There is no pitting, could be picture, reference were you think you see pits and I will send you pics of the areas you are referring to. In my hands I don't see any
 
Actually it is not even paint issues, looking at them further there appears to be something under the paint. And it was like that at time of painting as it does not move when pressure is applied to it. As you stated you never seen Mike do work like this before , as you know then that Mike had levels of restoration he would do, 10 feet 5 feet 3 feet from the car and out of the box holding the item in front of your face with all different costs pertaining what footage the customer wanted and also what condition the item is in when he starts the process as we all know there isn’t any used parts out there that are perfect to start restoration on.I would rate these as 3 foot spears which are very nice for a street show car. Concours no but shows or Mopar meets they would be just fine
 
hemifiedbird said:
Actually it is not even paint issues, looking at them further there appears to be something under the paint. And it was like that at time of painting as it does not move when pressure is applied to it. As you stated you never seen Mike do work like this before , as you know then that Mike had levels of restoration he would do, 10 feet 5 feet 3 feet from the car and out of the box holding the item in front of your face with all different costs pertaining what footage the customer wanted and also what condition the item is in when he starts the process as we all know there isn’t any used parts out there that are perfect to start restoration on.I would rate these as 3 foot spears which are very nice for a street show car. Concours no but shows or Mopar meets they would be just fine
Click to expand...
You are 100% right. Mike was the best (I bought all his tools to do the tube rivets). At your price is a steel. I will let my friend know who is looking for them. Thanks
 
Status
Not open for further replies.
-
Back
Top Bottom