67-69 barracuda windshield moldings

[cudacrazy67]

these will fit some other a body too like dart ect. but not dusters or dart sports. they are driver quality but with a little straightening and polish these would be show quality.250.00 plus shipping.thanks,mike.

 

[Cuda67Spain]

Hi!

And... is it valid for a 67 Coupe????

Could you tellme wich is the correct windshield gasket for fit this moldings????

Thanks!!!

TATO

PD= How much is the shipping cost to Miami???? (33166)

 

[airwoofer]

If you have a 67 yuou should read this thread:

http://www.forabodiesonly.com/mopar/showthread.php?t=138799

The 1967 is unique to that year only. You can convert to SS trim used in 68/69 but also need that year rubber gasket. Right now they are very hard to find if not impossible.

 

[cudacrazy67]

yes ,like he said, this will fit on a 67 but you need to change the gasket first to a 68 or 69 gasket. it will not work with the 67 gasket. 67s have a push in plastic molding that has a very poor chrome coating on them. if you decide to switch to a 68 or 69 gasket i will ship these to you for 20.00.thanks,mike.

 

[Cuda67Spain]

Ok! I wrote months ago for this question: http://www.forabodiesonly.com/mopar/showpost.php?p=438313&postcount=26

Whatever... My gasket is for 68-69 cuda??????

The part no. of rear gasket is: 40.518.81 is new, but i try fit the rear windshield and it is impossible!

Cudacrazy, the moldings are good???

Only with polish could be great????

And the gasket.... Is new????


Thanks!!!

TATO

 

[cudacrazy67]

the moldings will need minor straightening and polished to be great. thanks,mike.