[Found!] '67-'69 valiant/'70-'73 duster rear bumper brackets
- Thread starter MOPAROFFICIAL
- Start date
-
- Status
$40 plus ride
MOPAROFFICIAL
If it has tits, it's a liabilititty.
Shipping is to 92054
The brackets I have the corners are cleaned for install of AMD bumpers. The bumpers are thin and the brakect corners leave marks on the outside, they are also glass beaded and primed. I am in Pa. shipping would be $35 to Cal. $75 total
MOPAROFFICIAL
If it has tits, it's a liabilititty.
I did a lot of poking round and was told they are great n all that, triple chrome, but pinching with my fingers it feels like the AMD is maybe .010 thinner than my stock bumper.
Why is it that almost everything reproduced these days is of lesser quality than when produced in the stone age.
I used them on my Duster they are light weight. But they crumble easy.
Mail box. The licence plate held up better than the bumper.
Make sure you smooth all the corners off on the brackets next to the bolts or you will have dents protruding.
Mail box. The licence plate held up better than the bumper.
Make sure you smooth all the corners off on the brackets next to the bolts or you will have dents protruding.
MOPAROFFICIAL
If it has tits, it's a liabilititty.
Who makes a better one?
Factory rechrome but $$$$. You send them a nice core you never get yours back. Also the drivers side top of all the rear Duster bumpers we got. All had a slight dip. Put blue tape on it turn it upside down and straighten it with a piece of wood and a hammer. Don't take much so be careful. Here is a picture of mine from the rear The dip was right under the left tail light as all were. Look across your before you put the brackets on.
MOPAROFFICIAL
If it has tits, it's a liabilititty.
The bumper is going back, took it all the way out of the box and found it was dropped on its end by fuckhead ups man.
Last edited:
He could have stumbled over it. It wouldn't take more than a big toe to bend the end in.
Either way let me know if you want the brackets. I would have to get a set off a bumper and cleaned up. Steve
Either way let me know if you want the brackets. I would have to get a set off a bumper and cleaned up. Steve
MOPAROFFICIAL
If it has tits, it's a liabilititty.
I'll be sending you the cash sometime this week. They are sending another tomorrow and have a claim with ups....man, i kinda don't want such a cheap pos on my car..ket alone as safety feature....its more like a steel zip tie for a light pole than structural integrity.
I'd like to have something behind it to keep from being crushed in, small square tube under bumper or something. Not that I plan on getting hit again.
Yeah we talked on the phone. You said you wanted the rear bumper brackets. I smoothed them and glass beaded them as you said to to but I have not heard back from you. PM me and let me know your intentions. Thanks Steve
MOPAROFFICIAL
If it has tits, it's a liabilititty.
Thank you very much.
As you now know I've sent the money via PayPal, thanks again!
Yes payment was received . Thanks will send tracking. Steve
- Status
-
Similar threads
