67 Barracuda Radio Delete Plate

[matthon]

Anyone have one?
I have a reproduction plate, I hate it, first pic
The second pic below is the correct plate.

Technically not a radio delete as any radio was an option in 67, but who cares, people like to say 'radio delete.'

 

[Small Block]

I have one i just pulled out of a 67 Valiant post car. Studs on the back are still intact and the front will need some cleaning. Looks like someone stuck some sticky tabs on it and left some residue on the face. The measurements are 7.75" X 2". See if that matches yours.
Small Block

 

[matthon]

The one I have is roughly 7.5 by 1.5, about 1/16 shorter on both measurements.
2 inches wide is too wide to fit and by the looks of it if I trimmed it down it would loose the overlapping edge.

 

[67valiant 100]

I have one i just pulled out of a 67 Valiant post car. Studs on the back are still intact and the front will need some cleaning. Looks like someone stuck some sticky tabs on it and left some residue on the face. The measurements are 7.75" X 2". See if that matches yours.
Small Block

Just curious, how much are you looking to get?

 

[matthon]

Still looking...

 

[matthon]

None out there in FABOland?

 

[340wedge]

I'll take the one you don't want off your hands Matthon..just let me know how much, I need one for my Duster and have been looking for one

 

[cuda20]

I have one but its from a 67 valiant also. Thought it would be the same as a cuda?

 

[matthon]

They are not the same, at least the ones I have seen, the Valiant one is too tall to fit on the Barracuda dash. Plus the Barracuda one has a slightly beveled edge.
The pic of the correct plate is from an original car.
I've seen them before-before I knew mine did not come with a radio of course.

 

[340wedge]

Where can you buy that reproduction plate?

 

[matthon]

I got mine on eBag, not accurate, just a blob of plastic with studs, but it fits.

 

[67Baccaruda]

Hi Matt,

I have one, but I'll never part with it. :toothy8:

I could have swore someone is re-popping them.

Try Layson's parts

http://www.laysons.com/Catalog.cfm?nCatID=536&nModelID=3&nModelYear=1967

 

[matthon]

I'll trade you a radio for it?
Dammit!

I checked Laysons, they list 2:

PH-67ARD Radio Delete Bezel 67 -74 A-Body with a picture, see below.

PH-679CRD Radio Delete Ralley Dash 67 -69 Barracuda with no picture.

I'm not sure which one, or if they it is the crappy repro like I already have.

Their website sucks, searching is listed down the left side, words are overlapping- and can they put up a few pictures- I found 1. Pictures help sell stuff. I think I might just be in a bad mood today.

Has anyone dealt with these guys? Are their parts any good?

In the end, I would still prefer an original one.