67 Dart grill

-

knahavasu

Well-Known Member
Joined
May 19, 2013
Messages
270
Reaction score
38
Location
Lake Havasu City
slowly gettin the wifes 67 Dart convertible back together and need a little help with the front grill brackets.

Does anyone have a pic or two of the lower brackets the grill attaches to. I don’t have them and would like an idea of what they look like so I can fabricate new ones. Center and right and left of center.

Thanks
 
Hope this helps, All I had taken. As I recall left and right bracket are the same. the bend is not 90 deg to the brkt more like 80 deg. If you can wait till the weekend I will see if the extras I have are handy and can photograph better photos for you
PM me if you want some larger photos
20180504_092334.jpg
20180504_092338.jpg
20180504_092342.jpg



20180504_092342 - Copy.jpg
 
Thank you. If you have the time for other pic’s they would be great.
Does the center bracket look the same ?
 
Center bracket goes directly to the latch bracket. Note orientation of the screws and brackets and the heads are hex head with a recessed center.

I'll see about locating my extra brackets in the next day or so.


Drivers side

20181001_225044.jpg

Pass side
20181001_225054.jpg



Center brkt looking to the drivers side
20181001_225027.jpg
 
I'm going to do you one better. PM me your address and I'll send you my two spares. I think the holes are stripped on a few of the holes but larger screws or some well placed weld should make them usable.

Dana
 
That would be awesome my friend but thank to your pic’s I was able to locate the brackets that are left and right of center. I strightened the brackets and checked the fit and what do you know, a perfect fit.

The center attach point is the only one I need. So if you have that center bracket that would be fantastic !! Thanks a million for your help.

Keith Dennis
3860 Yucca Way
Lake Havasu City, AZ
86404
 
The center bracket should be riveted to the grill. no additional bracket like the left and right of center "L" brackets are used. The center bracket bolts directly to the center support. Is your grill missing the center riveted on brackets? All 3 of the center and left and right of center riveted on brackets are the same stamping. The far left and far right riveted on brackets are mirror images of each other. See photos farther down below.


center support.JPG


upload_2018-10-3_9-59-16.png





Close up of the riveted bracket on the center of the grill
20181003_095640.jpg


Drivers side is the near end in this photo
20181003_095559.jpg


Grill from drivers side to passenger side
20181003_095611.jpg
20181003_095616.jpg
20181003_095620.jpg
20181003_095624.jpg
 
Guess i just need to strighten the center bracket. I’m not to bright at times. Thank you for your help
 
-
Back
Top