LocuMob Fluid Technician Joined Oct 30, 2013 Messages 5,739 Reaction score 8,398 Location Southern Mn Jan 25, 2014 #1 I'm cloning a 67 Dart GT and need to know the location of the mounting holes. Or the location of the emblem itself. Any help would be appreciated.
I'm cloning a 67 Dart GT and need to know the location of the mounting holes. Or the location of the emblem itself. Any help would be appreciated.
T Two7T3Dart .... Joined Sep 11, 2011 Messages 323 Reaction score 34 Location Canuckistan Jan 26, 2014 #2 Bar between "G" and "T" is 4.25 in. from fender edge. Mounting holes are centered side to side on back, so that will be the side to side measurement. Top to bottom will have to be eye-balled.
Bar between "G" and "T" is 4.25 in. from fender edge. Mounting holes are centered side to side on back, so that will be the side to side measurement. Top to bottom will have to be eye-balled.
LocuMob Fluid Technician Joined Oct 30, 2013 Messages 5,739 Reaction score 8,398 Location Southern Mn Jan 26, 2014 #3 I think I can scale that from the pic. Thanks!