67 Dart project car

-
Status
Not open for further replies.

danmc77

Well-Known Member
Joined
Sep 28, 2005
Messages
1,111
Reaction score
7
Location
Barto, PA
Rating - 100%
6   0   0
Contact seller
I have posted this a couple times w/ just about zero interest, but I thought I'd adjust the price again and try one last time.

have a 67 Dart for sale with tons of great parts. TITLE IN HAND.

I planned to make a 68 GTS clone with a 440, so most of the parts are 68. Original /6, AC car. the car has just about every orignail part, minus the engine and tranny.

Car
currently a roller w/ no tranny or engine.
73 V8 Spool K member w/ discs
NO rust around either windshield or firewall
Lower quarters need replaced
VERY solid trunk
Driver side floor board needs replaced
solid rockers
solid flat hood
All windows and hardware still installed
manual steering gear w/ NIB pitman arm
Original dash and steering column
All the interior panels and trim are still in the car
rear rails behind the rear axel are thin with rust
Small hole on front driver's frame where it must have bottomed out.
all bumper brackets and things like that are still there.



EXTRAS
Mopar spring relocation kit NIB
Schumacher BB motor mounts NIB
REPO stainless front hood trim NIB
68 center auto console
RUST FREE FULL ORIGINAL QUARTERS for BOTH sides!!
Quarters still have RUST FREE trunk extensons attached!!
VERY solid and VERY straight 68 front fenders
VERY solid and straight GTS rear deck lid (in addition to the one on the car)
Great condition 68 bucket seats and rear seat (in addition to the original rear seat in the car)
187 BB oil pan primed and ready to go (excellent condition)
Good condition 68 tail light assemblies w/ lenses and bezels
PRIMO, SUPERB, Excellent condition original 69 wiring harness from front to back of car including dash harness (not ONE burnt or damaged connector)
Nice 68 Grille
Nice 68 headlight bezels
nice 68 front and rear windshield stainless trim
Excellent condition GTS tail trim panel
440 block w/ crank (needs rebuilt)
set of lower control arms w/ sway tabs and original sway bar (inaddition to the LCA on the car)
PRIMO, SOLID original rear frame rail sections including hanger boxes to fix rear rails
Solid, original frame section to patch and repair front frame rail hole
68 tail light mounting sections including portion of quarter w/ marker lights (back end of quarters from a 68 to graft in 68 rear marker holes)
Auto console shifter and linkage
Rechromed front bumper
Very solid/straight driver rear bumper (68)
Extra top plate for auto console in excellent condition
Great condition radio/ A/C interior trim bezel
73 spool tranny mount crossmember
68 Dash frame w/ upper and lower pads (lower in great condition[blue], upper is black but was recovered[not greatest job]

might have some other parts that I can't think of right now.

$1,800 firm
Have a bunch of pics
Car may be a little rough, but I have tons of great parts and the hardest parts to get are already here.

PM or e-mail me
[email protected]
have a 67 Dart for sale with tons of great parts. TITLE IN HAND.

I planned to make a 68 GTS clone with a 440, so most of the parts are 68. Original /6, AC car. the car has just about every orignail part, minus the engine and tranny.

Car
currently a roller w/ no tranny or engine.
73 V8 Spool K member w/ discs
NO rust around either windshield or firewall
Lower quarters need replaced
VERY solid trunk
Driver side floor board needs replaced
solid rockers
solid flat hood
All windows and hardware still installed
manual steering gear w/ NIB pitman arm
Original dash and steering column
All the interior panels and trim are still in the car
rear rails behind the rear axel are thin with rust
Small hole on front driver's frame where it must have bottomed out.
all bumper brackets and things like that are still there.



EXTRAS
Mopar spring relocation kit NIB
Schumacher BB motor mounts NIB
REPO stainless front hood trim NIB
68 center auto console
RUST FREE FULL ORIGINAL QUARTERS for BOTH sides!!
Quarters still have RUST FREE trunk extensons attached!!
VERY solid and VERY straight 68 front fenders
VERY solid and straight GTS rear deck lid (in addition to the one on the car)
Great condition 68 bucket seats and rear seat (in addition to the original rear seat in the car)
187 BB oil pan primed and ready to go (excellent condition)
Good condition 68 tail light assemblies w/ lenses and bezels
PRIMO, SUPERB, Excellent condition original 69 wiring harness from front to back of car including dash harness (not ONE burnt or damaged connector)
Nice 68 Grille
Nice 68 headlight bezels
nice 68 front and rear windshield stainless trim
Excellent condition GTS tail trim panel
440 block w/ crank (needs rebuilt)
set of lower control arms w/ sway tabs and original sway bar (inaddition to the LCA on the car)
PRIMO, SOLID original rear frame rail sections including hanger boxes to fix rear rails
Solid, original frame section to patch and repair front frame rail hole
68 tail light mounting sections including portion of quarter w/ marker lights (back end of quarters from a 68 to graft in 68 rear marker holes)
Auto console shifter and linkage
Rechromed front bumper
Very solid/straight driver rear bumper (68)
Extra top plate for auto console in excellent condition
Great condition radio/ A/C interior trim bezel
73 spool tranny mount crossmember
68 Dash frame w/ upper and lower pads (lower in great condition[blue], upper is black but was recovered[not greatest job]

might have some other parts that I can't think of right now.

$1,800 firm
Have a bunch of pics
Car may be a little rough, but I have tons of great parts and the hardest parts to get are already here.

PM or e-mail me
[email protected]
IMG_2093.jpg

IMG_2090.jpg

IMG_2087.jpg

IMG_2091.jpg
 
Status
Not open for further replies.
-
Back
Top