lardog
New Member
All original sheet metal except hood and bumpers aar hood fiberglass bumpers with light weight brackets. Mini tubed 6 point roll bar with swing outs, in board spring kit , super stock springs. Narrowed 8 3/4 rear end with 3:91 spool and moser axels and sub frame connectors.
Front end rebuilt with moog parts and willwood disk brakes and aluminum radius arms.
Engine was built by Rodd Marrinucci of plum crazy racing and is a 60 over 440 steel crank Hypereutectic pistons, solid lifter cam edelbrock heads 950 proform carb and roller rockers,
champion radiator,
custom aluminum air box for scoop. 530 hp on pump gas on the dyno.
Transmission is rebuilt with A&A parts, reverse shift body, cheetah shifter and stall converter.
Exhaust is shumaker tri-y's three inch with spin tech mufflers.
Mickey Thompson ET street radials P/295/65/R15.
Have heater box, spare grill, and 2 pairs of light weight van seats that need to be restored and one set of 15X8 4.5 back space weld wheels with like new MT 295/9.0 slicks.
have 30k invested if not more. asking 25,000 or make offer.
Front end rebuilt with moog parts and willwood disk brakes and aluminum radius arms.
Engine was built by Rodd Marrinucci of plum crazy racing and is a 60 over 440 steel crank Hypereutectic pistons, solid lifter cam edelbrock heads 950 proform carb and roller rockers,
champion radiator,
Transmission is rebuilt with A&A parts, reverse shift body, cheetah shifter and stall converter.
Exhaust is shumaker tri-y's three inch with spin tech mufflers.
Mickey Thompson ET street radials P/295/65/R15.
Have heater box, spare grill, and 2 pairs of light weight van seats that need to be restored and one set of 15X8 4.5 back space weld wheels with like new MT 295/9.0 slicks.
have 30k invested if not more. asking 25,000 or make offer.
