[WANTED] 67 or 68 Barracuda front clip

Cars and Mopar Parts Wanted

Thread Status:
Not open for further replies.
  1. Cody Scollay

    Cody Scollay New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 19, 2020
    Location:
    California
    Local Time:
    12:23 AM
    Contact Seller
    Hi guys. I am currently in the search for front fenders, front header panel, passenger side grill, hood, hood hinges, and core support for our 67 barracuda as we are trying to piece back together after an accident. Not picky so either 67 or 68 parts can be used. If you guys have links to where I could find these parts please post them. Thank you!
     
  2. Cody Scollay

    Cody Scollay New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 19, 2020
    Location:
    California
    Local Time:
    12:23 AM
    Also would be open to parts car that are reasonably priced with the parts listed above.
     
  3. g413

    g413 Well-Known Member

    Messages:
    519
    Likes Received:
    131
    Joined:
    Aug 26, 2014
    Location:
    Fresno, CA
    Local Time:
    2:23 AM
    Sorry about your accident. Check moparmat2000 - he has a lot of parts just listed for 2nd generation Barracudas.
     
  4. moparmat2000

    moparmat2000 FABO Gold Member FABO Gold Member

    Messages:
    19,081
    Likes Received:
    8055
    Joined:
    May 13, 2010
    Location:
    Grand Tetons
    Local Time:
    2:23 AM
    I have some stuff. PM me. I even got a box big enough to ship it.

    A set of front bumper brackets cleaned and primered not listed
    Upper header panel listed (needs some TLC)
    Lower valance not listed (needs some TLC)
    Hood latch support bracket not listed

    FYI if you find good clean straight steel fenders and nice grilles you will pay dearly for them. Ditto for a good hood. Nobody repops any of it. A core support will work from any 67-72 A body. That part does not need to be barracuda specific. Good luck on your hunt. Eventually you will find all of it.
     
    Last edited: Oct 2, 2020
    • Like Like x 1
    • Stroked408

      Stroked408 FABO Gold Member FABO Gold Member

      Messages:
      111
      Likes Received:
      74
      Joined:
      Oct 3, 2007
      Location:
      Bay Area California
      Local Time:
      12:23 AM
      Where are you located in California? I’m in the Bay Area just south of Oakland. Between my friend and I, we may have everything you need.
       
    • superbee6

      superbee6 FABO Gold Member FABO Gold Member

      Messages:
      199
      Likes Received:
      26
      Joined:
      Aug 25, 2009
      Location:
      San Jose CA
      Local Time:
      2:23 AM
      Hey Cody,

      I'm in San Jose and we have been parting out a 67 barracuda. We have pretty much everything you need, Fenders (very nice ones), nice hood, Will sell the whole car so you cna use the rad support and anything else you may need. I think the only thing we may still need from it is the trunk pan.

      Send me a PM.
      Bruce
       
    • superbee6

      superbee6 FABO Gold Member FABO Gold Member

      Messages:
      199
      Likes Received:
      26
      Joined:
      Aug 25, 2009
      Location:
      San Jose CA
      Local Time:
      2:23 AM
      By the way, if you are in SoCal, we are planning a trip down there in a couple weeks, can bring stuff down to you.
       
    • GTX JOHN

      GTX JOHN Well-Known Member

      Messages:
      200
      Likes Received:
      109
      Joined:
      Dec 12, 2009
      Local Time:
      2:23 AM
      Nice 68 Formula S Hood $375.00
      Doors $ 300. each
      Will Deliver in So Cal for $50.
       
    Thread Status:
    Not open for further replies.
    1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
      By continuing to use this site, you are consenting to our use of cookies.