67 Valiant Windshield

[Princess Valiant]

So I am going to need a windsheild gasket to do my dash swap.

67 and 68 are calling for the same part number but if I recall, there was something goofy about the original 67 Gasket.

The 68 to 76 will work on a 67 ?

 

[doug 371]

yeah, 67 has that chrome strip insert where the 68 and up use the clip on trim. You will need to install clips if you plan to use the chrome

 

[JDMopar]

@doug 371 nailed it. If you haven't seen it, check out the video in the link below. Great info there to prevent a leak!

Is your 67-76 A-body windshield leaking ?

Check here. You can reach it in the car without removing the windshield. Not easy but can be done by someone with little arms and Belly. Watch the video

www.forabodiesonly.com

 

[Princess Valiant]

Seems like converting it to the stainless trim is a lot better than messing with that plastic chrome stuff that seems nearly impossible to get ahold of.

Thanks for all the insight

 

[str12-340]

There's a reason Ma Mopar made the switch, so if it's not a 100 point resto....

 

[Dana67Dart]

A reproduction plastic strip is available.

It is not concourse correct but...

 

[4spdragtop]

I swapped our 67 cuda over to stainless(68+). I could send you some shitty brittle mylar lol..Precision sells it new.
A 67 gasket and 68+ gasket are 2 different animals. Why are they showing the same part #'s? Somethings not right

 

[clementine]

I think i have some 67 windshield stuff.

Locking strip and the beloved corner peices.

Ill send it with that stereo stuff that is collecting dust

Still rocking a sled with that mad base?