[Found!] 68/69 Barracuda Exhaust Tips

[MidnightSwinger]

Looking for used exhaust tips to match the patina on my ‘67. My tail pipes are 2.5” and I think I could make some originals work, but aftermarket is ok as long as they are the Barracuda style with the hanger on the flat part of the tip.

 

[69FBCuda]

The originals are 1.5" I think, so you would have to modify the inlet.

 

[MidnightSwinger]

The originals are 1.5" I think, so you would have to modify the inlet.

1 7/8” I think but if you cut enough off I believe that goes up to 2 1/4. Or I’m hoping anyway.