68 Dart rear window

[m99roadster]

I have a 68 Dart 4 door 270 that I purchased a couple months ago. On the bottom piece of the rear window reveal moulding it has a screw in each conner. My question is, should it be there, is that the way it came from the factory?

Thank F

 

[waggin]

I dont believe it is supposed to be there, I have spare trim if you need it, any pics of the offending screw?

 

[m99roadster]

My spelling wasn't very good, I'll pay attention. No I don't have a picture of it, the molding is off the car and in a shop to get the dings and scratches taken out then polished. The guy in the shop said he didn't think there should have been screws in it but he wasn't sure. He says he can weld them in. I just wanted to be sure before he does it. Thanks F

 

[805moparkid]

key are you talkin inside or outside trim on the rear? if your talking the stainless on the outside no...

its held with the clips that screw into the body...

but the inside is all screw in.....

 

[m99roadster]

I'm talking outside stainless

 

[805moparkid]

I'm talking outside stainless

yea no screws...

 

[m99roadster]

Thanks for your help I'll have them filled

 

[805moparkid]

Thanks for your help I'll have them filled

thats what she said...