Duster_Dude
In the garage
Now up for sale is my 69 Barracuda Fastback Roller. Original 318 / 904 / 7.25 Factory A/C car. Silver exterior & Red interior was the original color combo. Car is very solid, does need front floor pans, otherwise, chassis is in very nice shape. Has some area's of rust that need tending too, the left side under the rear window needs fixed. I have a cut out from another car for this that is included in the sale. The rear quarter panels have small holes in them behind the wheel openings, I have quarter panels cut from a donor car that will also accompany the car. Glass is all intact, interior will need a redo. It has late 70's B body front bucket seats in it currently. The area around the transmission tunnel has had a hole placed in it for a four speed shifter at some point. The front floor pans and shifter area are the only areas on the underside with any issues. (Easily fixed with a complete front half floor pan from AMD). It currently wears a 68 left front fender. (It had a 67-68 front end on it when I purchased it, I tracked down & swapped over to the correct 69 stuff) I do not have a title, sold on a bill of sale. I did have the Ohio BMV start the process of acquiring a new title, which they checked the VIN and it was good, but never seen it thru due to shelving the project indefinetly. I have some extra parts that I will include, such as brand new USA Made individual floor pans for the front floor, under dash A/C vent unit, and a right front inner fenderwell removed from a donor. (Has some small wrinkle in it, no core support damage.) I also have a couple different grills which I purchased separately for the car, which are negotiable in the sale. The car is a great starting piece for a restoration or race car project. It may be ugly, but it is solid. Asking $2,500 (or trade for a newer gas utilitiy golf cart) Serious inquiries only please. Car is located in N/E Ohio.
Pm me for more info.
Pm me for more info.
