Hey guys, I’ve got a 1969 Barracuda with a 318 with the automatic right now but I’m getting ready to do a hemi swap. Eventually I wanna put a 392 based stroker motor with the 8HP90 8 speed automatic in it, however first I’m putting a 5.7 Hemi with the 545RFE 5 speed auto in it, I was wondering how extensive the modifications would be to the floor pan to make them fit and if the required modifications for the 545 and 8HP’s would be similar. Also where I could get motor & transmission mounts for each if they are available and anything else I’d need the 5.7 and 545 is out of a ram 1500 so I have motor transmission, wiring harness, computer, etc. provided they are all usable for the swap. the 392 would come from a scat pack car since I’d use the shifter from the car. Any other parts I’d need for either please let me know too. Any other info I need to know would be appreciated too.
Thanks in advance everyone
Thanks in advance everyone